Products

Home > ProductsTEP Series is the Bismuth Telluride based thermoelectric modules for converting heat into electricity. It is designed to optimize its performance for around 200C heat source

The power module is designed and manufactured by our patented technology for converting heat source directly into electricity. The module is Bi-Te based thermoelectric module that can work at the temperature of as high as 330 °C (626 ℉) heat source continuously, and up to 400°C(752℉)intermittently. The thermoelectric module will generate DC electricity as long as there is a temperature difference across the module. The more power will be generated when the temperature difference across the module becomes larger, and the efficiency of converting heat energy into electricity will increase therefore. The module is stuck with the high thermal conductivity graphite sheet on its both sides of the ceramic plates to provide low contact thermal resistance, hence you do not need to apply thermal grease or other heat transfer compound when you install the module. The graphite sheet can work well in extremely high temperature.

 

 

TEP Series Thermoelectric Power Module

Part Number

The following specification are based on that tthe hot side temperature is at 300 ℃ and cold side at 30 ℃.

TEP1-1263-3.4

  • Size: 30 mm x 30 mm
  • Open circuit voltage: 10.8 volts
  • Matched load resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 96 watts
  • Heat flux: about 10.7 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12635-3.4

  • Size: 35 mm x 35 mm
  • Open circuit voltage: 10.8 volts
  • Matched load resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 94.7 watts
  • Heat flux: about 7.7 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1264-1.5

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 9.4 volts
  • Matched load output resistance:2.8 ohms
  • Matched load output voltage: 4.7 volts
  • Matched load output current: 1.56 amperes
  • Matched load output power: 7.3 watts
  • Heat flow through the module: about 133 watts
  • Heat flux: about 8.4 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1264-3.4

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 10.8 volts
  • Matched load output resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 98.2 watts
  • Heat flux: about 6.2 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12656-0.6

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 8.8 volts
  • Matched load output resistance: 1.19 ohms
  • Matched load output voltage: 4.4 volts
  • Matched load output current: 3.68 amperes
  • Matched load output power: 16.2 watts
  • Heat flow through the module: about 282 watts
  • Heat flux: about 9.0 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12656-0.8

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 9.9 volts
  • Matched load output resistance: 1.67 ohms
  • Matched load output voltage: 5 volts
  • Matched load output current: 2.9 amperes
  • Matched load output power: 14.5 watts
  • Heat flow through the module: about 247 watts
  • Heat flux: about 7.9 watts/cm2
 downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1994-3.5

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 13.4 volts
  • Matched load output resistance: 5.7 ohms
  • Matched load output voltage: 6.7 volts
  • Matched load output current: 1.12 amperes
  • Matched load output power: 7.5  watts
  • Heat flow through the module: about 137 watts
  • Heat flux: about 8.6 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-24156-2.4

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 17.7 volts
  • Matched load output resistance: 4.4 ohms
  • Matched load output voltage: 8.8 volts
  • Matched load output current: 2.0 amperes
  • Matched load output power: 17.6 watts
  • Heat flow through the module: about 301 watts
  • Heat flux: about 9.6 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

 

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.

海王捕鱼钻头蟹怎么打 下载天天重庆麻将 湖北30选5中奖号码 广东闲来麻将所有版 … 股票指数公式 河南11选五开奖结果走势图 下载海龙王捕鱼 微乐麻将破解版 体彩p5技巧 广东十一选五开奖直 递回购与股票融资融卷是什么意思 广东体彩11选五怎样中奖 钱柜老虎机手机客户端 设计赚钱网站 熊猫麻将吧 熊猫麻将四川麻将 河北快三网上购买